280-8166-00
DXZ656MP
15
English
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio
stations in memory. Pressing the corresponding
[
DIRECT
] button recalls the stored radio
frequency automatically.
1. Press the [
BND
] button and select the
desired band (FM or AM).
2. Press the corresponding [
DIRECT
] button to
recall the stored station.
∗
Press and hold one of the [
DIRECT
] buttons
for 2 seconds or longer to store that station
into preset memory.
Manual memory
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
2. Press and hold one of the [
DIRECT
] buttons
for 2 seconds or longer to store the current
station into preset memory.
Auto store
Auto store is a function for storing up to 6
stations that are automatically tuned in
sequentially. If 6 receivable stations cannot be
received, a previously stored station remains
unoverwritten at the memory position.
1. Press the [
BND
] button and select the
desired band (FM or AM).
2. Press and hold the [
] button for 2
seconds or longer. The stations with good
reception are stored automatically to the
preset channels.
∗
If auto store is performed in the FM bands, the
stations are stored in FM3 even if FM1 or FM2
was chosen for storing stations.
Preset scan
Preset scan receives the stations stored in
preset memory in order. This function is useful
when searching for a desired station in memory.
1. Press the [
] button.
2. When a desired station is tuned in, press the
[
] button again to continue receiving that
station.
Note:
• Be careful not to press and hold the
[
]
button
for 2 seconds or longer, otherwise the auto store
function is engaged and the unit starts storing
stations.
Radio Operations
Listening to the radio
1. Press the [
SRC
] button and select the radio
mode. The frequency appears in the display.
2. Press the [
BND
] button and select the radio
band. Each time the button is pressed, the
radio reception band changes in the
following order:
FM1
➜
FM2
➜
FM3
➜
AM1
➜
FM1...
3. Press the [
a
,
d
] lever upward or
downward to tune in the desired station.
Tuning
There are 3 types of tuning mode available, seek
tuning, manual tuning and preset tuning.
Seek tuning
1. Press the [
BND
] button and select the
desired band (FM or AM).
∗
If “
MANU
” is lit in the display, press and hold
the [
BND
] button for 1 second or longer.
“
MANU
” in the display goes off and seek
tuning is now available.
2. Press the [
a
,
d
] lever upward or
downward to start automatic station tuning.
When the lever is pressed upward, search
will be performing in the direction of higher
frequencies. When the lever is pressed
downward, search will be performed in the
direction of lower frequencies.
Manual tuning
There are 2 ways available: Quick tuning and
step tuning.
When you are in the step tuning mode, the
frequency changes one step at a time. In the
quick tuning mode, you can quickly tune the
desired frequency.
1. Press the [
BND
] button and select the
desired band (FM or AM).
∗
If “
MANU
” is not lit in the display, press and
hold the [
BND
] button for 1 second or longer.
“
MANU
” is lit in the display and manual tuning
is now available.
2. Tune into a station.
●
Quick tuning:
Press the [
a
,
d
] lever upward or
downward and hold in position for 1 second
or longer to begin station tuning.
●
Step tuning:
Press the [
a
,
d
] lever upward or
downward to perform manual tuning.
