Clarion DXZ656MP, Owner'S Manual

Page: 20 / 29

20
DXZ656MP
280-8166-00
English
CD/MP3/WMA Operations
1. Press and hold the [ RDM ] button for 1
second or longer to perform folder random
play.
“ RDM ” appears in the display.
●
To cancel play
1. Press the operating button previously
selected.
Play list mode
This function allows you to play tracks, up to
latest 5 time stamps, by reading the play list
information written on the disc.
1. Press and hold the [ P.LIST ] button for 1
second or longer to turn on or off the play list
mode.
∗
Play list play is possible only when there is a
file whose extension is “
.M3U ” on the CD-R/
RW.
∗
Up to 5 play lists can be recognized, and up to
255 files can be recognized per play list.
2. Press the [
a
,
d
] lever upward or
downward to change the track.
3. Press the [ DN ] button to move to the
previous play list.
Press the [ UP ] button to move to the next
play list.
Notes:
• The SCN/RPT/RDM functions cannot be used
while in the play list mode.
• The title display changes from folder name to play
list name.
Making a play list
1. Write desired tracks to a CD-R/RW, etc. Be
sure to use alphanumeric/ASCII characters
for all file names.
2. Make a play list by using a multimedia
player, etc. and save the data. The file format
must be M3U.
3. Again, write this play list to the CD-R/RW,
etc.
Notes:
• When writing to a CD-R/RW, etc., be sure to use
alphanumeric/ASCII characters.
• Up to 5 layers can be recognized as a list. For
written play lists, latest 5 lists are recognized in
the order in which they are written.
• When writing to a CD-R/RW, etc., turn off the Disc
At Once function.
• When adding a play list, it is recommended to
write it in the Root folder.
Operations Common to
Each Mode
To change display setting
1. Press and hold the [ D ] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [
a
,
d
] lever upward or
downward to select the “ item name ”.
“CLOCK”
↔
“SPE/ANA PTN”
↔
“S/A
SENS”
↔
“S/A SPEED”
↔
“SCREEN
SVR”
↔
“MSG INPUT”
↔
“AUTO
SCROLL”
↔
“SCRL SPEED”
↔
“DIMMER
LV”
↔
“CONTRAST”
3. Turn the [ ROTARY ] knob to select the
“ desired setting value ”.
∗
In the case of item names appearing with the
“
Push ENT ” suffix, after the item name, the
[ ] button must be pressed to display the
setting value.
∗
After completing settings, press the [ D ] button
to return to the previous mode.
●
Setting the clock
2-1. Select “ CLOCK ”.
3-1. Press the [ ] button.
3-2. Press the [
a
,
d
] lever upward or
downward to select the hour or the minute.
3-3. Turn the [ ROTARY ] knob to set the correct
time.
∗
The clock is displayed in 12-hour format.
3-4. Press the [ ] button to store the time into
memory.
Note:
• You cannot set the clock when it is displayed with
only the ignition on. If you drain or remove the car’s
battery or take out this unit, the clock is reset. While
setting the clock, if another button or operation is
selected, the clock set mode is canceled.
●
Setting the spectrum analyzer pattern
∗
The factory default setting is “ 1 ”
2-1. Select “ SPE/ANA PTN ”.
• When the Main display or Title display is set
3-1. Turn the [ ROTARY ] knob to select the
setting.
Each time you turn the [ ROTARY ] knob,
the setting changes in the following order:
“ SPE/ANA PTN 1”
➜
“ SPE/ANA PTN
2”
➜
“ SPE/ANA PTN 3”
➜
“ SPE/
ANA PTN 4”
➜
“ SPE/ANA PTN SRC
ICON”
• When the Sub display is set
3-2. Turn the [ ROTARY ] knob to select the
setting.