Clarion CZ309A, Owner'S Manual

Page: 10 / 30

Basic Operations
English
10
CZ309A
3-1. Each time you press the [
w
] or [
z
] button,
the tone effect changes in the following
order:
“
Z+FLAT
”
↔
“
CUSTOM
”
↔
“
EXCITE
”
↔
“ IMPACT ”
↔
“ B-BOOST ”
↔
“ OFF ”
Z+FLAT : user Z+FLAT
CUSTOM : user custom
EXCITE : bass and treble emphasized
mid emphasized
IMPACT : bass and treble emphasized
B-BOOST : bass emphasized
OFF : no sound effect
When “Z+FLAT” is set:
3-2. Press and hold the [ ] button for 1second
or longer, bass/treble characteristics
become flat and switch to the “
CUSTOM ”
mode.
When “CUSTOM ” is set:
3-1. Press the [
x
] or [
v
] button to select the
“ BASS ” or “ TREBLE ” mode to adjust.
When “EXCITE/IMPACT/B-BOOST” is set:
3-2. Press the [ ] button.
3-3. Press the [
w
] or [
z
] button to adjust the
setting in the range of –3 to +3.
∗
The factory default setting is “ 0 ”.
3-4. Press the [ ] button to return to the
previous mode.
●
Adjusting the bass
This adjustment can be performed only when
the Z-Enhancer Plus is set to “
CUSTOM ”.
2-1. Select “ BASS ”.
3-1. Press the [
w
] or [
z
] button to select as
following order.
“ BASS<G> ”
↔
“ BASS<F> ”
↔
“ BASS<Q> ”
∗
The factory default setting is “ BASS<G> ”.
3-2. Press the [ ] button.
3-3. Press the [
w
] or [
z
] button to adjust the
gain, the F (center frequency) and the Q.
BASS<G>
: The factory default setting is “ 0 ”.
(Adjustment range: +7 to –7)
BASS<F>
: The factory default setting is “
60
”.
(Adjustment range: 60/80/100/200)
BASS<Q>
: The factory default setting is “ 1 ”.
(Adjustment range: 1/1.25/1.5/2)
3-4. Press the [ ] button to return to the
previous mode.
●
Adjusting the treble
This adjustment can be performed only when
the Z-Enhancer Plus is set to “
CUSTOM ”.
2-1. Select “ TREBLE ”.
3-1. Press the [
w
] or [
z
] button to select as
following order.
“ TREB<G> ”
↔
“ TREB<F> ”
∗
The factory default setting is “ TREB<G> ”.
3-2. Press the [ ] button.
3-3. Press the [
w
] or [
z
] button to adjust the
gain, the F (center frequency) and the Q.
TREB<G> :The factory default setting is “ 0 ”.
(Adjustment range: +7 to –7)
TREB<F> : The factory default setting is
“ 10k ”.
(Adjustment range:
10k/12.5k/15k/17.5k)
3-4. Press the [ ] button to return to the
previous mode.
●
Adjusting the balance
2-1. Select “ BALANCE ”.
3-1. Press the [
w
] or [
z
] button to adjust the
balance of the right and left speakers.
∗
The factory default setting is “ CENTER ”
(center). (Adjustment range: RIGHT12 to
LEFT12 (right 12 to left 12))
●
Adjusting the fader
2-1. Select “ FADER ”.
3-1. Press the [
w
] or [
z
] button to adjust the
balance of the rear and front speakers.
∗
The factory default setting is “
CENTER
”
(center). (Adjustment range: FRONT12 to
REAR12 (front 12 to rear 12))
●
Setting the subwoofer
You can set the low pass filter of subwoofer.
2-1. Select “
S-W LPF
”.
3-1. Each time press the [
w
] or [
z
] button to
select the setting, the setting changes in
the following order:
“
THROUGH
”
↔
“
LPF 50
”
↔
“
LPF 80
”
↔
“ LPF 120 ”
∗
The factory default setting is “ THROUGH ”.
CZ309A_ENG.book Page 10 Thursday, November 27, 2008 1:53 PM