Clarion CX501, Owner'S Manual

Page: 24 / 37

Bluetooth Operations
English
24
CX501
●
AUTO ANS
This is a setting to determine whether any
incoming call will
b e a u tomatically or man u ally
answered.
∗
The factory defa u lt setting is “ OFF ”.
2-1. Select “ AUTO ANS ”.
3-1. T u rn the [ ROTARY ] kno b to select “ ON ” or
“ OFF ”.
ON: Any incoming call is a u tomatically
answered in 5 seconds.
OFF: User needs to man u ally answer the
call.
●
AUTO CONNECT
This f u nction allows the Bl u etooth to b e
connected a u tomatically with pre v io u sly
connected de v ice. Connection can b e
esta b lished at any so u rce mode.
∗
The factory defa u lt setting is “ OFF ”.
2-1. Select “ AUTO CON ”.
3-1. T u rn the [ ROTARY ] kno b to select “ ON ” or
“ OFF ”.
ON: A u tomatic connection is ena b led.
OFF: A u tomatic connection is disa b led.
●
PASS KEY
This PASS KEY is u sed d u ring pairing mode. A
maxim u m of 10 digits can b e changed thro u gh
the car stereo.
∗
The factory defa u lt PASS KEY is “ 1234 ”.
2-1. Select “ PASS KEY ”.
3-1. Press the [ ROTARY ] kno b .
4-1. Press the [
x
] or [
v
] bu tton to remo v e
the c u rsor.
5-1. T u rn the [ ROTARY ] kno b to select the
desired digits.
6-1. Press and hold the [ ROTARY ] kno b
(1 sec.) to store in memory.
●
ADDRESS
This will hold the u ni qu e Bl u etooth address. The
address is 16 fig u res.
2-1. Select “ ADDRESS ”.
The Bl u etooth address 8 fig u res appears in
the display.
3-1. T u rn the [ ROTARY ] kno b to display.
●
Bluetooth Name
This will display the name of the Bl u etooth.
2-1. Select “ BT NAME ”.
The Bl u etooth name appears in the display.
●
Bluetooth Firmware version
This will display the Firmware v ersion of the
Bl u etooth.
2-1. Select “ BT FW ”.
The Bl u etooth Firmware v ersion appears in
the display.
CX501_ENG.book Page 24 Thursday, November 4, 2010 3:55 PM