Basic Operations
Eng
lis
h
11
CX501
3-1. Each time you turn the [
ROTARY
] knob to
select the setting, the setting changes in
the following order:
“
THROUGH
” “
60
” “
90
” “
120
”
∗
The factory default setting is
“
THROUGH
”.
Adjusting the subwoofer output
volume
You can adjust the volume output from the unit’s
subwoofer output terminal.
2-1. Select “
S-W VOL
”.
3-1. Turn the [
ROTARY
] knob to increase or
decrease the subwoofer volume.
∗
The factory default setting is
“
0
”.
(Adjustment range: +6 to –6)
Setting the phase
2-1. Select “
PHASE
”.
3-1. Turn the [
ROTARY
] knob to select as
following order:
“
NORMAL
” “
REVERSE
”
∗
The factory default setting is “
NORMAL
”.
Adjusting the high pass filter
2-1. Select “
HPF
”.
3-1. Each time you turn the [
ROTARY
] knob to
select the setting, the setting changes in
the following order:
“
THROUGH
”
↔
“60”
↔
“90”
↔
“120”
∗
The factory default setting is “
THROUGH
”
(through).
Note:
•
During SOUND adjustment mode, if no operation
is performed for more than 10 seconds, this
mode can be cancelled and return to previous
mode.
CX501_ENG.book Page 11 Thursday, November 4, 2010 3:55 PM
