CAM2
CAM2 TRIGGER SETUP
FULL SCREEN
SPLIT SCREEN
CAM1
CAM4
CAM2
CAM2
CAM1
CAM3 TRIGGER SETUP
FULL SCREEN
SPLIT SCREEN
CAM3
CAM1
CAM3
13
English
<Trigger input> or <Trigger signal> is when camera priority is selected by a signal, for example
if driver uses right/left turn signal or reverse gear, the monitor shows connected camera in
driving mode.
※ Below example is based on「TRG2 (Left turn signal)=CAM2 / TRG3 (Right turn signal)=CAM3
/ TRG1 (Reverse gear)=CAM1」
１） If there is a trigger signal input, the connected camera is displayed as full screen and
switches back when the signal switches off.
Former screen
CAM2 signal input
２） In case of TRG2 (Left turn signal) or TRG3 (Right turn signal), you can choose full screen or
split screen by OSD setting.
※ This function is for showing not only Left(Right) but also rear side at once, regardless of
former screen status. It displays CAM2(3) and CAM1 as split screen when TRG2(3) signal
input is on.
SCREEN SWITCH BY TRIGGER INPUT
7
Press MENU button on the
monitor or SETUP button on
the remote control in CAM2 full
screen mode, then OSD menu
appears.
Press MODE button on the moni-
tor or ▼ button on the remote
control to move 「SPLIT SCREEN」
and press ▲ button on the moni-
tor or OK button on the remote
control.
If there is a left signal input
(TRG2), then CAM1(Rear) will be
shown in right side and CAM2
will be shown in left side.
Press MENU button on the mon-
itor or SETUP button on the re-
mote control in CAM3 full screen
mode, then OSD menu appears.
Press MODE button on the mon-
itor or ▼ button on the remote
control to move 「SPLIT SCREEN」
and press ▲ button on the mon-
itor or OK button on the remote
control.
If there is a right signal input
(TRG3), then CAM1(Rear) will
be shown in left side and CAM3
will be shown in right side.
