Clarinet Systems, Inc.
//www.clarinetsys.com
Page 5
3 CONFIGURATION
3.1 PDA support
The ES5001/5004 currently supports PDA running Palm, Psion, PPC 2002/2003, CE/Net
4.1 & 4.2, CE5.0, and WM5.0.
3.2 EthIR LAN web-based Administration Tool (AdminTool)
EthIR LAN web-based Administration Tool can be accessed via IE browsers. This tool
provides the following functions:
•
Allow user to use static IP or DHCP for EthIR LAN
•
Allow user to setup IP address, Subnet Mask, Gateway, WINS and DNS information
when using static IP.
•
Allow user to setup NAT configuration for the USB ports
•
Allow user to setup network identification such as device name and domain name for
the EthIR LAN
•
Allow user to change password
•
Allow user to review reports of critical changes
•
Allow user to update firmware
3.3 Access AdminTool and change ES5001/5004 initial values
DHCP is the default setting in ES5001/5004 and it will obtain one IP address from DHCP
server. IP addresses of USB ports are assigned by internal NAT. To change the setting,
please access the ES5001/5004 through AdminTool. Further, please designate the URL
using the IP_address or Device_name as shown below.
http://<ES5001/5004 IP_address>:9876
(Note syntax: http://<IP address><colon>9876/ )
User ID: admin
Password: password
If the network contains a WINS server, you may use the Device Name of the ES5001/5004
in place of the IP address.
All fields will be overwritten when restoring factory default by pushing the Reset Button for 8
seconds or longer.
The Default Factory Setting is as follow:
