![Clare Controls CM-MT4410-BT-70 Manual Download Page 41](http://html1.mh-extra.com/html/clare-controls/cm-mt4410-bt-70/cm-mt4410-bt-70_manual_2612492041.webp)
HDBaseT 4x4 Matrix Switcher User Guide
33
No output image when switching
Ensure that switching is being made to the correct output channel.
Ensure that the source is on and sending a signal. Verify this by switching the
source to an alternate display, or by routing the source directly to a display.
Ensure that the display is on the correct input and can receive a signal. Verify
this by switching to an alternate source, or connecting a source directly.
If you are unable to view video via the switch and all cables, and sources and
displays are working when bypassing the switch, contact Customer Support
for further assistance.
If the POWER indicator does not work, or does not respond to any operation,
ensure the power cord is connected properly. Check to be sure that a circuit
breaker has not tripped and that power is available. If power is available and the
switch will not power on, please contact Customer Service for assistance.
If the matrix switch fails to respond to commands on the front panel, ensure that
panel has not been locked via RS232. If the switch fails to respond to commands
from RS232, IR or front panel, please contact Customer Service.
Summary of Contents for CM-MT4410-BT-70
