Clare Controls CM-MT4410-BT-70, Manual

Page: 29 / 44

HDBaseT 4x4 Matrix Switcher User Guide 21
%9901. Set as infrared carrier enforcing mode.
%9911. Reset to factory default.
%9951. Check the command sent by port 1 when PWON.
%9952. Check the command sent by port 2 when PWON.
%9953. Check the command sent by port 3 when PWON.
%9954. Check the command sent by port 4 when PWON.
%9955. Check the command sent by port 1 when PWOFF.
%9956. Check the command sent by port 2 when PWOFF.
%9957. Check the command sent by port 3 when PWOFF.
%9958. Check the command sent by port 4 when PWOFF.
%9961. Check the system locking status.
%9962. Check the status while in standby mode.
%9963. Check the working mode of infrared carrier.
%9971. Check the connection status of the inputs.
%9972. Check the connection status of the outputs.
%9973. Check the HDCP status of the inputs.
%9974. Check the HDCP status of the outputs.
%9975. Check the switching status.
%9976. Check the output resolution.
EDIDG[x].
Get EDID data from the output and display the output port
number of X.
EDIDMInit. Recover the factory default EDID data.
EDIDM[X]B[Y]. Manually EDID switching. Copy the EDID data of
output[X] to the input[Y].
EDIDUpgrade[x]. Upgrade EDID data via the RS232 port
[X] is for input port, when the value of X is 5, it means to
upgrade to all input ports. When the switcher gets the
command, it will show a message to send EDID file (.bin
file). Operations will be canceled after 10 seconds.
(Note 1)
DigitAudioON[x] Enables HDMI audio output of port x.
X=1,2,3,4 enables only the specified port 1-4.
X=5, enables all 4 ports 1-4.
DigitAudioOFF[x] Disables HDMI audio output of port x.
X=1,2,3,4 disables only the specified port 1-4.
X=5, disables all 4 ports 1-4.