Clare Controls CM-MT4410-BT-70, Manual

Page: 22 / 44

14 HDBaseT 4x4 Matrix Switcher User Guide
IR control
Using IR and HDBaseT transmission technology, the switcher has the following
functions.
 Control far-end output device from local
 Control local input and output device remotely
 Control the switcher locally or remotely
Note: Non-flashing emitters are not supported.
You can control the switcher using its built-in IR receiver, or through the IR EYE port by
connecting it to an extended IR receiver. Or, you can control it remotely using an IR
device though the twisted pair.
IR remote
Figure 5: IR remote
(1) Standby Press to enter or exit Standby mode
(2) Input buttons 1 to 4, IR signal switched to the corresponding HDMI signal.
(3) Menu buttons
ALL
(GLOBAL),
EDID
and
CLEAR
buttons have the same function as
those on the front panel.