HDBaseT Extender Set 100m User Guide
5
System connection
Usage precautions
•
System should be installed in a clean environment and have proper temperature
and humidity controls.
•
All of the power switches, plugs, sockets, and power cords should be insulated for
safety.
•
All devices should be connected before powering on.
•
The Cat5e/Cat6 terminations for HDBaseT devices should be a straight-thru
TIA/EIA T568B standard.
Application examples
The Rx100 receiver works in conjunction with the Tx100 transmitter or an HDBaseT
matrix switch, such as Clare Controls’ 4x4 Matrix Switch. By transmitting signals across
reliable Cat5e/Cat6 cables, the video signal can be used at far greater distances from
the source device than would be capable with traditional HDMI cables. Additionally,
control signals can be sent bi-directionally across the same Cat5e/Cat6 cable. The
following system diagram shows you a sample application for the HDBaseT Extender
and/or the Rx100 receiver.
Summary of Contents for CM-BT10-TXRX100
Page 1: ...Doc ID 2015 04 620 Rev 03 HDBaseT Extender Set 100m User Guide Model CM BT10 TXRX100...
Page 2: ......
Page 4: ......
Page 20: ......
