Clare Controls Clare Video Doorbell Version 2 User Manual Download Page 21

Scan the code to view  

product warranty details.

Clare Controls offers a three (3) year limited warranty on  
original Clare Controls components, from the date of 
shipment from Clare Controls. To view complete limited 
warranty details, including limitations and exclusions, visit  
www.clarecontrols.com/warranty.

Warranty

Frequently Asked Questions

What is the operating voltage of the doorbell?

The doorbell has an operating voltage range of 15.5VAC to 28.5VAC and 
has a max power draw of 12 watts (.7 amps at 15.5VAC).

Q:

A:

How do I increase the volume of the microphone and speaker?

You can adjust these settings under the device settings in the App 
under loudspeaker volume and microphone volume. 

Q:

A:

Can I view my doorbell camera on multiple devices?

In order to share a doorbell camera with multiple mobile devices, all 
users must all be logged into the same ClareVision Plus account. You 
can have up to 8 devices viewing the camera simultaneously. 

Q:

A:

Can the doorbell camera get wet?

The Clare Video Doorbell is IP54 rated for direct rain and water. It is not 
recommended to pressure wash the doorbell. 

Q:

A:

20

Summary of Contents for Clare Video Doorbell Version 2

























Reviews: