Next, refer to diagram 4 to connect your
existing doorbell wiring to the leads
located on the back of the Video Doorbell.
If your existing wiring is not long enough,
follow the instructions below to extend
your wiring.
To extend the existing wiring use the provided
wire extenders and easy-to-use connectors.
Insert the wires into the connectors as shown
in diagram 5 and use pliers to snap the button
into place. There is no need to strip any wires
as the connectors will pierce the insulation
for you.
Note:
The two wires used to power the Video
Doorbell can be hooked up to either terminal.
Diagram 4
Diagram 5
Connecting Power To The
Video Doorbell
Install
Step 3
Terminal
screws
x 2
Required
hardware
Wire
extenders
x 2
Optional
hardware
9
Wire
connectors
x 2
Optional
hardware
