Optional
Step
A resistor must be installed on the leads of the chime for proper
operation. Simply wrap the ends of the supplied resistor around the
terminals on the doorbell chime. Connecting the resistor in the wrong
direction will not cause harm to either device, your doorbell will just
not ring properly. If this is the case, simply reverse the direction of the
resistor and verify proper installation by ringing the doorbell.
Installing The Supplied Resistor
• The resistor must be used when installing the Video
Doorbell with a digital doorbell chime.
• The resistor can also be installed when using a mechanical
chime to eliminate potential doorbell buzzing.
Digital Chime
Clare Video
Doorbell
Resistor
(Included)
Transformer
11
Resistor
x 1
Optional
hardware
