STEP 14
Buckle
Sleeve
1) Drape the Tent, PN 103707 over the Hoop Poles. Attach the tent to the poles on the inside with the
Velcro straps.
2) Slide the remaining Hoop Poles through the sleeves in the front of the tent.
3) Attach the last two Hoop Poles to the remaining poles connected to the bracket.
4) Install the last two Spreader Poles, PN 101836.
5) Attach the Tent to the Base with the Buckle on each side.
IMPORTANT!! When collapsing the X4 Shelter it is very important to collapse the front Hoop Poles
first to relieve the tension on the tent when folding. Failure to collapse the Front Poles first may
cause the tent to tear at the corners and will not be covered under warranty.
