STEP 12
1) Install the Hoop Poles and Light pole assembled in the previous steps to the Poles installed to the
brackets in Step 9.
2) Install the Spreader Poles, PN’s 101839 and snap on the “S” Clips, PN 103609, (2) per Spreader pole.
3) Install the Rope, PN 101249 by routing it thru the Holes in the Base and knotting each end.
The light Poles, PN 109560 can be mounted in any of the
Hoop Pole locations. The recommended location is directly
above the seats.
Do not install the two front
hoop poles until Step 14.
STEP 13
Install the Battery Bracket Kit,
PN 108829, this can be placed
anywhere that works best for
your application. This can be
installed at a later time if you
wish.
