background image

 

 

 

 
 

 

-  T i p s  f o r  U s e  -

 

 

Folding and transporting your Clam Ice Fishing shelter is easy:

 

▪ 

Unsnap the spreader poles and lay them in the bottom of the base.

 

▪ 

Push the Rapid Pole Slide push buttons and retract each hoop, starting with the floor hoop and working

 

towards the middle.  Rotate all retracted hoops to the resting position.  Tuck the tent into the base and

 

between the hoops so that no material is left hanging on the ground for transport.

 

▪ 

Cover with the Travel Cover* PN 109741-to help prolong the life of the unit.

 

▪ 

We  recommend  the  optional Runner  Kit* (PN  109934) be  mounted  to  the  base  of  your  shelter (NOTE:

 

Pulling behind an ATV or snowmobile may result in premature wear of the base).

 

▪ 

In  windy  conditions  it  is  advised  to  secure  your  shelter  to  the  ice  using  Clam’s  Ice  Anchor  Kit  (PN

 

108064) and Ice Anchor Installation Tool (PN 108348).

 

 

Make  sure  your  Ice  Shelter is  completely dried  out  after  each  use.  Store  your  Ice  Shelter in  a  cool,  dry 
place. Keep away from rodents.

 

 

*For replacement parts, frequently asked questions, shelter information, and all of your ice fishing needs 

visit our web site at www.clamoutdoors.com.

 

 

-  S a f e t y  I n s t r u c t i o n s  -

 

 

Please  fully  understand  and  follow  all  safety  instructions  as  outlined.   Failure  to  do  so  could  result  in 

severe injury or death.

 

▪ 

Do not use  open flame heaters in your ice shelter. Injury or death may result from fire if tent fabric is 

exposed to open flame. The tent is not fireproof, but the fabric is treated with a fire retardant that meets 

CPAI-84  specifications.  Application  of  any  foreign  substance  may  render  the  flame  retardant  properties 

ineffective. Ice Armor fabric will melt when contact is made with hot surfaces (i.e., heaters).

 

▪ 

Death from  asphyxiation may  result from  use  of oxygen depleting heaters. Open all vents  for  fresh air 

ventilation.

 

▪ 

Never leave shelter unattended when set up.

 

▪ 

Due to the increase in traffic (snowmobiles, autos, etc.) on area lakes, ice fishing can be hazardous at

 

night.  If  you  choose  to  fish  at  night  or  in  poor  visibility  conditions,  be  sure  to  take  precautions  with

 

lights or reflectors to show drivers your whereabouts. Night time: exterior reflectors must be visible to 
reduce risk of collisions.

 

 

 

 

 

 

 

 

Death  from  asphyxiation  may  result  from  use  of oxygen  depleting  heaters.  Open  all  vents  for 
fresh air ventilation. 

Injury or death may result from fire if tent fabric is exposed to open flame. 

Tent  fabric  is  not  fireproof.  Fabric  will  burn  with extended exposure to open flame.   Do  not 
use  open  flame  products  inside  tent.  Tent    fabric    is  treated  with  fire  retardant.  Application  of 
any foreign  substance  may  render  the  flame  retardant properties ineffective. 

Night time: exterior reflectors must be visible to reduce risk of collisions. 

This tent is made with flame resistant fabric which meets CPAI-84 specifications. 

Summary of Contents for X4 TC













Reviews: