10
Instruc
tions f
or installer - 9120-15004 - MCX - 801053 - M
a
rch 2013 v1.01
Seal
Seal
Hot Water
Connection
(outlet, G1/2”)
Strainer
Cold Water
Connection
(inlet, G1/2”)
Fig. 3
7. Installation
Pipe connection
1. The cold water inlet (blue) and hot water outlet (red) are marked on the rating plate. Connect the appropriate pipes from the tap to the
water inlet and outlet accordingly. Avoid exerting any mechanical pressure on the appliance by applying a spanner on the flats of the
inlet and outlet connections when tightening the pipe connectors (Fig.3).
2. Once the water connections have been made, check for any leaks and rectify as necessary.
3. In order to obtain an optimum water jet at low flow rates, always screw the jet regulator supplied with the unit onto the tap outlet.
This insert fits commercially available sleeves with an M22 or M24 thread.
4. To remove the water heater, insert a wide bladed screwdriver behind the unit from above and gently lever the unit out of the wall
bracket.
