13
Instruc
tions f
or installer - 9120-15004 - MCX - 801053 - M
a
rch 2013 v1.01
9. Flow rate adjustment
Direction
Flow
Tem pe ra ture
in crease (+) /
decrease (-)
–
+
+
–
Adjustment of the flow rate is to be done by a Qualified Technician.
Decreasing the flow rate:
Turning the adjusting screw clockwise decreases the flow rate, thus making a higher outlet temperature possible.
Increasing the flow rate:
Turning the adjusting screw counter-clockwise increases the flow rate, thus reducing the possible outlet temperature.
10. Removing the appliance from the wall bracket
To remove the appliance from the wall bracket:
1. Insert a flat head screwdriver all the way into the lock.
2. Gently angle the screwdriver upwards by approximately 10° as shown in the image below.
3. Pull the appliance forwards by approximately 15° as shown in the image below.
4. Carefully pull the appliance upwards to complete the removal process.
NB: See Section 8 on reinstalling the appliance.
