clage GERMAN POOL GPIM7, Operating Instructions Manual

Page: 6 / 40

6 7
• Secure the wall bracket to the wall with screws and suitable wall plugs (see fig 1).
• Place the appliance on the wall bracket and snap it into position (see fig. 2).
• The appliance is good for undersink and oversink installation according to the examples of installation
on the next pages. For undersink installation the water connectors must point vertically upwards.
• Pipe connection (see fig. 3): Cold water inlet (blue) and hot water outlet (red) are marked on the rat-
ing plate. Connect the appropriate pipes from the tap to the water inlet and outlet accordingly. Avoid
exerting any kind of mechanical pressure exerted on the appliance, e.g. by water pipes etc.
• After installation, carefully check all connections for leaks and rectify as necessary. In order to obtain
an optimum water jet at low flow rates, always screw the enclosed jet regulator onto the tap outlet.
This insert fits commercially available sleeves with an M22 or M24 thread.
cold water connection (inlet)
hot water connection (outlet)
seal
seal
strainer
fi g. 3
Abb. 1 fi g. 1 Abb. 2 fi g. 2 fi g. 2
3
2
1
6. Installing the appliance