clage GERMAN POOL GPIM7, Operating Instructions Manual

Page: 10 / 40

10 11
10. Commissioning
Do not switch on the electric power at this time!
1. Open the hot water tap and allow water to flow until it emerges free of air bubbles.
2. Now close the circuit breaker to connect the electrical supply.
3. If desired, set the desired outlet temperature inside the appliance (see Fig. 7).
4. Explain the functions of the heater to the user and ensure that he knows how to use it.
Hand over these operating instructions to the user.
1) temperature rise (Kelvin) + cold-water temperature = maximum hot-water temperature (°C) ≤ 50 °C
2) CCC approved cable requried
Type GPI­M7
Art. No. 120061
capacity litre 0.2
nominal pressure in MPa (bar) 1 (10 )
heating system IES system / bare resistance element
water resistance at 15 °C in Ω cm ≥ 1000
electric supply 1/N/PE~ 220 V
nominal power rating 6.0 kW
nominal current 27,3 A
temperature choice ca. 3 0 °C – 5 0 °C
factory temperature setting ca. 45 °C
max. inlet remperature 30 °C
factory flow setting at 3 bar 4.5 l/min
Maximum temperature 2.0 l/min
increase at rated power 2.5 l/min
and a flow rate of… 3.0 l/min
3.5 l/min
4.0 l/min
43 K
1)
34 K 1)
29 K 1)
24 K 1)
21 K 1)
Required l/min to switch on l/min
Required l/min to switch off l/min
1.5
1.3
Cable size mm 2 4.0 2)
weight filled with water (approx.) 1.5 kg
dimensions (H × W × D) 13.2 × 18.7 × 8.0 cm
protection class according to VDE 1
type of protection according to VDE IP 24
11. Technical specifications