DSX
14
DSX SERVOTRONIC MPS®
Problem
Cause
Solution
Water stays cold,
digital display does
not light up
Master fuse tripped
Renew or activate fuse
Safety pressure cut-out
tripped
Contact customer service
Water stays cold,
digital display does
light up
Safety thermal cut-out
tripped
Contact customer service
Display shows error
symbol “wrench”
Control system has
switched off
Switch fuses off and on. If
symbol “screwdriver” is still
indicated, contact customer
service
Flow rate of hot
water too weak
Outlet fitting dirty or
calcified
Clean shower head, jet
regulator or sieves
Fine filter dirty or
calcified
Let clean fine filter by customer
service
Selected temperature
is not reached
Water flow rate too high
(Re)activate motor-driven valve
Cold water has been
added via the tap
Tap hot water only; set
temperature, check outlet
temperature
Display: “
inlet TEMP
TOO HIGH
”
Inlet temperature
exceeding nominal
temperature
Reduce inlet temperature
No response upon key
press on device
Hood is not fitted
properly
Let refit the hood properly by
customer service
FX remote control
Problem
Cause
Solution
Symbol “battery“ lights Flat batteries
Insert two new type AAA
batteries in the remote control
Display: “
no
” and
appliance does not
response to the remote
control
Transmission range
exceeded
Place the remote control closer
to the appliance, press key
Disturbance through
other radio emitters
Repeat login with different
radio channel
Display: “
--
“ and
radio symbol flashes
Registration in process
Hold the remote control in front
of the water heater
5. Trouble-shooting and service
CLAGE GmbH
After-Sales Service
Pirolweg 1 – 5
21337 Lüneburg
Germany
Phone: +49 4131 8901-40
Fax:
+49 4131 8901-41
Email: [email protected]
This instantaneous water heater was manufactured conscientiously and checked
several times before delivery. Should malfunctions nevertheless occur, it is usually only
due to a bagatelle. First attempt to switch the house fuses off and on again in order to
reset the electronics. Next, try to remedy the problem with reference to the following
table. In doing so, you will avoid unnecessary expense of customer service assistance.
Repairs must only be carried out by
authorised professionals.
If a fault in your appliance cannot be
rectified with the aid of this table,
please contact the service organisation
of your importer or the Central
Customer Service Department. Please
have the details of the typeplate at
hand.
Al-Zamil Co. for Industry,
Trade and Transport
2973 Imam Abdullah Bin Saud Bin Abdul
Aziz Road Unit No.6
Riyadh 13217
P.O.BOX: 41397
Kingdom of Saudi Arabia
Phone: +966 11 4620146
Fax: +966 11 456 9089
Email: [email protected]
www.zamilco.com
Nebraska Trading
Mr. Jalal Jaffer
Block 704 Building
2333 Road 439
Salmabad, Block No. 704
Manama – Bahrain
Phone: +973 36347413
Email: [email protected]
EHAB CENTER FOR
IMPORT AND EXPORT
162 Omar Lotfy st
Sporting
21648 Alexandria
Arab republic of Egypt.
Call us: 01277779272
15421