The timer can be used to set two daily irrigation cycles.
Note:
All programs are set in the same way. Programs must be entered in chronological order, within a
24-hour timeframe. The timer automatically advances by 1 minute with respect to the set time, both
when OPEN and CLOSED.
Note:
If the symbol is flashing, this means the timer is waiting for a command. Press any button.
SETTING THE FIRST IRRIGATION CYCLE:
After setting the time, press the right arrow to open the page for program 1. The time 00:00 will show,
preceded by a 1 (for program 1). Press the middle ENTER button.
