Model XP2F
Installation, Operation, and Maintenance Manual
N-XP2F IOM V1.0-4.5
Page 29 of 35
4.5.3
Firmware Update
In order to update the X35 firmware, you will need access to a MicroSD card reader. The newest
firmware files are available from the Cla-Val website or your Cla-Val representative.
1.
Insert the SD card into your PC and locate the Root directory shown in
2.
Move the file that you received or downloaded into the “dist” folder.
WARNING – DO NOT Modify or delete any other files/folders!
3.
After the move is complete, safely remove the SD card from PC and insert back into the X35.
When you connect power back to the module, the firmware update will begin on startup.
Move the firmware file that
you want to update to into
this location.
Figure 4.37
