Model XP2F
Installation, Operation, and Maintenance Manual
N-XP2F IOM V1.0-4.5
Page 23 of 35
4.4.4.2
Outputs
Description:
Used when the milliamps/volts sent from an output channel on the X35 differ from the
value measured on a multimeter or PLC/SCADA system. Allows the discrepancy to be eliminated.
Figure 4.27
4.4.5
Display Options
Description:
Used to modify miscellaneous display settings.
Figure 4.28
How many
minutes of
idle time
before screen
turns off
Light mode is
useful when
screen is in a
dark room.
Dark mode is
useful when
screen is in
direct
sunlight.
Output channel to
calibrate
Pressing “Select”
then displays
subsequent fields.
Enter correct signal
measured on
multimeter/SCADA,
then press “Set Lo”.
Repeat for “Set
High”.
Reports current
signal X35 is
generating.
