CJB CJ ISA-E5, User Manual, Page: 13 / 90

ISA-E5 User`s Manual 5
devices.
1 x PS2 Keyboard/mouse connector with Mini-DIN 6-pins on
external I/O ports. Y-cable enclosed for both Keyboard and
Mouse access.
•
Hardware Monitor:
83627HF integrated hardware monitor chip to monitor
Voltages, Temperatures and FAN speed.
Temperature Monitor: CPU thermal diode, one sensor close
to CPU socket, one sensor close to 83627HF chip.
One CPU FAN for CPU cooler and one SYS FAN for chassis
FAN. All FAN speed are monitored and can be controlled by
CPU and System temperature to turn-on or turn-off.
•
10/100M Ethernet:
One VIA VT6103L on board for 10/100M LAN.
Support Wake Up-on-LAN.
The LAN connector is RJ45 connector on external I/O ports.
RJ45 connector with Link, Activity and Speed LED
indicators.
Remote Boot Agent is supported with PXE and RPL protocol.
•
PIDE and SATA:
PIDE controller build in VT8237 support up to UltraDMA
mode 6 or ATA133 speed.
One standard 40-pins box header to support 3.5” HDD,
CDROM, DVD player or DOM Flash Disk.
One standard 44-pins box-header support 2.5” HDD, Slim
CD-ROM or DOM Flash Disk.
One Compact Flash-II socket share with Secondary IDE
Channel. Jumper selectable as Master or Slave device.
Two SATA connectors from VT8237R support SATA-I and
SATA-II devices. Two SATA HDDs can be configured as
RAID0 or RAID1 through Option- ROM or Windows
Utilities.
•
Watchdog Timer:
The disable/enable selection can be programmed in BIOS
setup. The timeout interval can be set up through
programmed I/O address 300h/301h.
The timeout event will generate the RESET.
•
CMOS:
On-board RTC with 242 bytes of Battery-back CMOS RAM.
One 3-pins Jumper/2mm to clear CMOS data.