background image


 

5792 FCC/IC Approved Antennas: 

 

Manufacturer Model 

Type 

Connector 

Gain 

Nearson 

S151AH-2450S 

Omni whip 

SMA plug reverse polarity 

5dBi 

Nearson 

S141AH-2450 

Omni whip 

SMA plug reverse polarity 

2dBi 

Nearson 

S131AH-2450 

Omni whip 

SMA plug reverse polarity 

2dBi 

Nearson DG102N-2.4/5.25 

Omni 

whip 

SMA plug reverse polarity via 
provided Antenna Cable 

5dBi 

Centurion 

WCP2400-MMCX4 

Omni whip 

MMCX jack on 4” coax pigtail 

2.5dBi 

Maxrad MP24008XFPT 

Panel 

SMA plug reverse polarity via 
provided Antenna Cable 

8dBi 

Maxrad MYP24010PT Yagi 

SMA plug reverse polarity via 
provided Antenna Cable 

10dBi 

Maxrad MYP24014PT Yagi 

SMA plug reverse polarity via 
provided Antenna Cable 

14dBi 

 

 

5792 CE Approved Antennas: 

 

Manufacturer Model 

Type 

Connector 

Gain 

Nearson 

S151AH-2450S 

Omni whip 

SMA plug reverse polarity 

5dBi 

Nearson 

S141AH-2450 

Omni whip 

SMA plug reverse polarity 

2dBi 

Nearson 

S131AH-2450 

Omni whip 

SMA plug reverse polarity 

2dBi 

Nearson DG102N-2.4/5.25 

Omni 

whip 

SMA plug reverse polarity via 
provided Antenna Cable 

5dBi 

Centurion 

WCP2400-MMCX4 

Omni whip 

MMCX jack on 4” coax pigtail 

2.5dBi 

 
CE Mark Conformity 

City Theatrical Inc. declares that this product conforms to the specifications listed in this manual, following 
the provisions of the European R&TTE directive 1999/5/EC: 
 
City Theatrical Inc. vakuuttaa täten että dieses produkt tyyppinen laite on direktiivin 1999/5/EY oleellisten 
vaatimusten ja sitä koskevien näiden direktiivien muiden ehtojen mukainen. 
City Theatrical Inc. déclare que le produit est conforme aux conditions essentielles et aux dispositions 
relatives à la directive 1999/5/EC. 

• EN 301 489-1, 301 489-17 General EMC requirements for Radio equipment. 
• EN 60950 Safety 
• EN 300 328 Technical requirements for Radio equipment. 

 
CAUTION—This equipment is intended to be used in all EU and EFTA countries.   
Outdoor use may be restricted to certain frequencies and/or may require a license for operation. Contact 
local Authority for procedure to follow. 
Note: 

ESD precautions should be used when attaching or removing the antenna. 

Note: 

Combinations of power levels and antennas resulting in a radiated power level of above 100 mW 

equivalent isotropic radiated power (EIRP) are considered as not compliant with the above mentioned 
directive and are not allowed for use within the European community and countries that have adopted the 
European R&TTE directive 1999/5/EC. For more details on legal combinations of power levels and 
antennas, contact City Theatrical Inc. 
Do not use this product near water, for example, in a wet basement or near a swimming pool. 
Avoid using this product during an electrical storm. There may be a remote risk of electric shock from 
lightning. 

Summary of Contents for SHoW DMX SHoW Baby












Reviews: