background image


 

Introduction 

Thank you for using City Theatrical’s SHoW DMX SHoW Baby™ Wireless DMX/RDM 
Transceiver.     
 
The SHoW DMX SHoW Baby represents a breakthrough in plug-and-play wireless DMX and 
RDM transmission, and can be used either as a wireless DMX transmitter or receiver.  All you 
need now to set up a SHoW DMX wireless DMX system is two SHoW DMX SHoW Babies and 
two minutes! 
 
The SHoW DMX SHoW Baby features include: 

  SHoW DMX Neo™ 2.4GHz Frequency Hopping Spread Spectrum (FHSS) Radio 

  Wirelessly broadcast and receive a full Universe (512 slots) of DMX 

  Robust wireless DMX512 and RDM data transmission 

  Extremely low 7mS max latency 

  RDM proxy and responder functions  

  Instant plug-and-play configuration: 

For a Transmitter, connect DMX IN, for a Receiver, 

don’t!

 

  72mW ETSI broadcast power (with 5dBi Antenna) 

  Included Pipe Mount bracket for installation with C-Clamps or similar hanging hardware 

  Included CL2 Power Supply 

  Included 2dBi Omni-directional Antenna 

  Neutrik® 5P XLR Connectors for DMX IN and DMX OUT 

 
Every effort has been made to anticipate your questions in this manual, but if you have any 
questions that are not answered here, or you want to discuss a special application, please feel 
free to contact us directly at City Theatrical. 
 

SHoW DMX SHoW Baby Neo Settings 

The SHoW DMX SHoW Baby uses the 5792 SHoW DMX Neo Radio Module.  It is permanently 
configured with SHoW ID 201 for Adaptive Spread Spectrum Frequency Hopping and Neo Low 
Latency broadcast mode.  Using RDM, you can adjust the broadcast power, edit the RDM 
Device Label, and enable or disable RDM traffic.  No other settings are adjustable. 

 

SHoW DMX SHoW Baby Antennas 

The SHoW DMX SHoW Baby is shipped with a 2dBi Omni directional antenna.  Any of the 
approved antennas listed above may be used with the SHoW DMX SHoW Baby (please note 
the special installation requirements for use with the CTI # 5636 14 dBi Yagi Antenna).   
 
ETSI power settings for all 5792 SHoW DMX Neo Radio module equipped products, including 
the SHoW DMX SHoW Baby, are based on use with the CTI 5630 5 dBi Omni Antenna.  ETSI 
power and range will vary with the antenna used.  Contact your dealer or City Theatrical for 
more information.   
 
  
 

 

Summary of Contents for SHoW DMX SHoW Baby












Reviews: