66
The 7400-5707 SHoW DMX Vero Transceiver Configuration Guide
Configuration
You can configure the Vero Transceiver’s basic operating settings using the System Settings
(SHoW ID and Configuration) switches shown in the detail above.
Configuration switches:
P5, DMX Term: DMX512 termination On or Off. Turn On for end-of-line DMX512
connection
P4, Rx/Tx: Receiver (Rx) On, or Transmitter (Tx) Off. Selects Receiver or Transmitter
operation
P3, Reset: On or Off. Switch On to hold in Reset
P2, Bootloader: On or Off. Sets the unit to Bootloader mode to upload and install radio
firmware upgrades from a connected SHoW DMX Neo Transceiver or Receiver
P1, Default: On or Off. To restore the system to factory default settings:
1. Set P1 Default to On
2. Wait for Data Present LED to blink rapidly
3. Switch P1 to Off
SHoW ID
Like the original SHoW DMX Classic system, the SHoW DMX Neo system uses SHoW IDs as a
quick way to set RF configuration options. Each SHoW ID represents a combination of one of
