CITY BOSS R3, User Manual, Page: 7 / 12

E-scooter CITY BOSS R3
ENGLISH 43
DISPLAY OPERATION MANUAL
1 Current speed
2 Speed level 3 Mode button
4 Power button 5 Accelerator 6 Battery capacity indicator
7 Trip time 8 USB port (on the back of the display)
Displayed values when turned ON
a/ current speed in km/h
b/ speed level: 1 - slow; 2 - middle; 3 - fast (last set)
c/ battery capacity (the indicator varies depending on the current load / power consumption of
the engine)
d/ trip time
e/ PAS: non zero start activated (when the e-scooter stands, the accelerator does not respond)
Speed level set
The e-scooter features three speed modes that adjust the speed level. When the display is
turned on, the last used speed level is set.
Change the speed level:
1. press the Power button shortly - the speed level number starts blinking on the display
2. press the Mode button shortly to change the speed level
3. to save the desired level, press the Power button shortly or leave the display idle
Press the Mode button shortly and the functions rotate as follows:

TRIP - single ride distance. Press Mode button long to reset it to zero.

ODO - total distance traveled in km

CHA - no function

VOL - current voltage (it may fluctuate during the ride/load)
 DST - no function
 CH TIME - when switched to this function, the display turns off in 2 hours (time
countdown); You may appreciate it while charging a mobile phone from a USB port
 TIME - trip time
When the display is idle for 3 minutes it will automatically turn off (if countdown CH TIME is not
activated).