CITY BOSS R3 User Manual Download Page 12 | Manualshive

Page: 12 / 12

CITY BOSS R3 User Manual Download Page 12

E-scooter CITY BOSS R3

ENGLISH

48

SCOPE OF WARRANTY

The warranty only applies to e-scooter purchased from the CITY BOSS dealer.
The warranty does not apply to normal wear and tear (battery capacity, tire, etc.).

This limited warranty does not cover any problem caused by:
a/ commercial use, accident, abuse, neglect, shock, heat or humidity beyond product
specifications, improper instalation, operation, maintenance or modification.
b/ any misuse contrary to the instructions in the user manual.
c/ malfunctions caused by other equipment

The warranty will be void if the product has been disassembled or repaired by an unauthorized
person.
To request the warranty service, contact your dealer.

In case you need to send your e-scooter to service shop, please keep the original packaging.

The e-scooter CITY BOSS complies with standard ISO 12100:2010, EN 12184:2014 according to
the CE directive 2006/42/EC.

SPECIFICATIONS & PARAMETERS

Output

rating

Battery

capacity

Rated

voltage

Max.

distance*

Max.

load

Max,

speed

Tire
size

Net

weight

Battery

type

Charging

time

350 W

10,4 Ah

36 V

30 km

120 Kg 30 Km/h

8"

14,8 kg

Li-Ion

4 - 5 h

*

Depending on factors such as riderś weight, surface (hills), temperature, battery age, tire

pressure etc.

«
...
10
11
12

Summary of Contents for R3













Reviews:

No comments