™
40. Beat-Sync Select
These buttons are used to select which beat the effect will be on i.e. if the ½ button is selected the effects time
parameter will will match in time with the music every 2 beats.
X-Fade Effects Section
41. Echo Select
This button will assign an echo effect to the crossfade, so if the music assigned to X-Fade ‘B’ is playing moving
the x-fade to the left will take a sample of the music playing add an echo and fade it into the the music playing
on X-Fade ‘A’.
42. Platter Effect
This button will assign a platter effect to the crossfade, so if the music assigned to X-Fade ‘B’ is playing moving
the X-Fade to the feft will give the same effect as switching a turntable off as the fader is moved across the
musics pitch will drop.
43. Stutter Effect
This button will assing a stutter effect to the crossfade, so if the music assigned to X-Fade ‘B’ is playing moving
the x-fade to the left will take a sample and stutter it the more the X-Fade it moved to the left the faster the
stutter will become.
44. X-Fader Effects Select Switch
This switch is used to enable the X-Fade effects:
X-Fader
– When the switch is in the X-Fader position the effects will be assigned to the crossfader as explained
in 41,42 & 43).
Off
– this disables the X-Fader effects
Auto
– This enables the X-fade effects to be activated in syncronisation with the Beat Sync Select buttons (40).
Assign the crossfade (e.g. CH1 – X-Fade A and CH4 – X-Fade B) with the crossfader in position A or B press
the desired effect button (41, 42 or 43) the effect will then be played in the time selected by the Beat Sync
Select buttons (40) once the effect is complete the output will automatically change to the opposite channel of
the crossfade without the crossfade physically being moved.
