
™
Front Panel Illustration
Features & Functions Top Panel
Microphone Section
1. Microphone Input
Two combination XLR & ¼” jack sockets are mounted on the front face of the mixer for connecting your
balanced microphones.
Balanced Input wiring:
Tip:
Pin2: Positive (HOT)
Ring:
Pin3: Negative (COLD)
Sleeve:
Pin1:
Ground
(SHIELD)
Input Impedance
2.2K Ohm
Input Sensitivity
–55.4dBV (1.7mV)
2. Microphone EQ – Hi
This control allows 12dB of cut or boost to the high frequencies and is shared between Mic 1 & Mic 2.
3. Microphone EQ – Mid
This control allows 12dB of cut or boost to the mid frequencies and is shared between Mic 1 & Mic 2.
4. Microphone EQ – Lo
This control allows 12dB of cut or boost to the low frequencies and is shared between Mic 1 & Mic 2
5. Microphone On/Off & Override Switch
This switch is used to activate or deactivate Mic 1 and 2. When switched to ‘o’ride’ position the sound level for
everything other than Mic 1 & 2 will decrease by 14dB.
6. Microphone 2 Level Control
This controls the gain of microphone 2 giving the user maximum control. Set the gain to the desired level then
use the On/Off or O’ride switch (5) to activate the mic.
7. Microphone 1 Level Control
This controls the gain of microphone 1 giving the user maximum control. Set the gain to the desired level then
use the On/Off or O’ride switch (5) to activate the mic.