background image

 

 

 

Important Safety Information 

Warnings: 

 

All the safety and operating instructions should be read before the appliance is operated. 

 

To prevent fire or shock hazard, do not expose this appliance to rain or moisture. 

 

To reduce the risk of electric shock, do not remove the cover (or back). There are no serviceable parts inside. Always 
refer servicing to qualified service personnel. 

Cautionary Notes: 

 

Handle the power supply cord carefully. Do not damage or deform the power supply cord. If it is damaged or deformed, 
it may cause electric shock or malfunction when used. When removing from wall outlet, be sure to remove by holding 
the plug attachment and not by pulling the cord. 

 

In order to prevent electric shock; do not open the top cover. If a problem occurs, contact your dealer. 

 

Do not place metal objects or spill liquid inside the mixer. Electric shock or malfunction may result. 

 

Any use of the controls, or any adjustment, or the performance of any procedure other than those specified herein may 
result in serious damage to your health. 

 

The mixer should not be opened or repaired by anyone except properly qualified service personnel. 

 

Double insulated - when servicing, use only identical replacement parts. 

 

WARNING: - THIS MIXER MUST BE EARTHED FOR SAFETY AND GOOD GROUNDING PRACTICES IN 
MIXING.

 

In the event of ground - loop problems in the audio system, DO NOT disconnect the AC supply earth to any 
equipment before consulting equipment instruction manuals. For example most power amplifiers have audio 
ground lift switches, or are designed specifically to avoid ground - loop problems connected to ‘earthed’ mixers. 
Ensure the mixer has a ‘clean’ AC supply from a wall socket that is not used for other equipment that would lead 
to interference - such as lights, refrigerators etc. 
The SM-FX500 Ultima is available in AC supply standard: 
 

200 - 240V AC  - UK, EUROPE, KOREA & CHINA 

 

 

General Do’s & Don’ts  

There are a few general Do’s and Don’ts thoughts that you should become familiar with if you have not had a 
great deal of experience with professional audio systems.  
Cables & Connectors - Always use good quality cables and connectors. It might seem expensive when you first 
look at it, but the first time you have a problem in front of an audience you’ll curse the day you didn’t make that 
small investment. Over 30 years in the business has taught us that over 75% of all problems with DJ systems 
are simple connector ones. Don’t get caught out.  
Switching on your system - Get into the habit of turning on the mixer and all the inputs to it before you turn on 
the amplifiers. Play safe; always turn on your amplifiers last.  
Power Supply - The power supply for your SM-FX500 Ultima is built into the mixer and will be fitted with a mains 
plug specifically for the mains supply in your country. If it does not match the power socket you wish to use 
check with your dealer before you plug it in. It is possible you could damage your mixer if it is not the correct 
version for your mains power supply. Worse still, it could be unsafe. Don’t take chances with Mains Power - it 
can kill.  
Crossfader - The crossfader is the most used feature on your mixer and great care has been taken in the choice 
of components for this function. Even so, it is the most likely thing to wear out first on your mixer, so we’ve made 
it quick and easy to replace. Don’t get caught out, always carry a spare.

Summary of Contents for SM-FX500 Ultima













Reviews: