Citrix NetScaler SDX 11500 Manual Download Page 76

Page: 76 / 253

p.76

https://docs.citrix.com

6. When a message informs you that the certificate and key have been uploaded successfully, click OK to reset the device.

The reset takes approximately 60 seconds. You are then redirected to the logon page.

7. Log on to the LOM GUI by using your default credentials.

Note: If the certificate or key are invalid, the BMC reboots, tries the new settings, and reverts to using the previous
settings.

8. In the address bar, click the lock icon to display the connection tab, as shown on the screen below.

Summary of Contents for NetScaler SDX 11500
























































































































































































































































Search results

Summary of Contents for NetScaler SDX 11500

Reviews:

Related manuals for NetScaler SDX 11500

Brands by name

Popular brands

Citrix NetScaler SDX 11500, Manual

Search results

Summary of Contents for NetScaler SDX 11500

Reviews:

Related manuals for NetScaler SDX 11500

Brands by name

Popular brands