Chapter 3 Integrating with Cisco Unified Communications Manager 4.2(3)
13
Trunk Configuration page (continued): version 4.2(3)
Note
The PBX administrator must provide the following call routing information for
Inbound Calls
section of the SIP trunk configuration:
•
Calling Search Space
•
AAR Calling Search Space
If either of these values is not required, select
None
.
Setting
Description
Destination Address
The IP address of the EasyCall Gateway.
Destination Port
The port of the proxy server. Defaults to 5060 and should not be changed.
Incoming Port
The listening port of the Unified Communication Manager. Defaults to 5062.
Outgoing Transport Type
Must be UDP.
Preferred Originating
Codec
Must be 711ulaw.
