C
HAPTER
4
Integrating with Cisco Unified
Communications Manager 5.1
This chapter describes a sample configuration of Cisco Unified Communications
Manager 5.1 for integration with the EasyCall Gateway through a SIP trunk. The
examples show the Cisco Unified Communications Manager (previously referred to as
CallManager) administration software screens.
The following topics describe the integration:
“Configuring the SIP Trunk Security Profile” on page 19
“Configuring the SIP Trunk” on page 20
“Configuring the SIP Profile” on page 22
“Configuring Call Forwarding” on page 24
“Verifying the Integration” on page 26
Configuring the SIP Trunk Security Profile
The following table describes the SIP trunk security profile configuration values that
are important for EasyCall Gateway integration.
Setting
Description
Name
Must be Non Secure SIP Trunk Profile - UDP. When “Configuring the SIP Trunk”
on page 20, this name must be entered under the SIP Information section as
the SIP Trunk Security Profile.
Outgoing Transport Type
Must be UDP.
Incoming Port
Defaults to 5060. This is the listening port on the Unified Communication
Manager and it must match the EasyCall Gateway port, which also defaults to
5060.
