iDP-460 User’s Manual
10-3-2 Details
LF
ALL
[Name]
Feed Paper
[Code]
<0A>H
[Function]
This command prints the data in the print buffer and feeds the paper by one line. If
printing is completed, the command will shifts a printing position to the left margin and
clear the print buffer. This is a standard command for printing one text line.
[Caution]
In other than the P-250 mode and P-900R mode, this command is ignored immediately
after one-line buffer-full printing. In the P-250 mode and
P-900R mode, printing is not performed until this command is received.
[See Also]
ESC a, ESC b
FF
ALL
[Name]
Eject Paper
[Code]
<0C>H
[Function]
This command prints the data in the print buffer and ejects the paper by one inch,
regardless of the current setting of line height. This command allows you to view the last
line of the text and leaves an adequate margin in order to cut the paper.
[See Also]
ESC a
