10.HOURLY CHIME/ALARM MONITOR
To turn the hourly chime ON or OFF, push the (S)(upper left) and (R) Upper
Right buttons at the came time in the time mode.
When the hourly chime is turned on, the buzzer continues to sound while the two
buttons are pushed.
When the hourly chime is turned OFF, the buzzer sounds for the fixed previous
time. ALARM MONTITOR
11. POWER CELL LIFE INDICATOR
The colon in the digital section flashes on and off when the
power cell is in low charge state and needs replacing.
Depending on use, the analog section may stop operation before
the power cell indicator starts operation.
12. USE OF THE REGISTER RING
The register ring can be turned in only one direction,
counter clockwise. An anti-reverse mechanism with a
click sound is provided in order to protect the above
mechanism. Do not use force to turn the bezel in a
clockwise direction. Otherwise, the case may become
damaged and need replacement.
Set the triangle /\ mark to the position of the minute
hand as the dive start time to read the elapsed time.
The ring can be turned in units of one half minutes.
13. HOW TO READ THE NON-DECOMPRESSION LIMIT VALUES
Depending on the diving depth, the diver may
surface without decompression.
A dive limit table may be noted on your
watchband. This able indicates dive time limits
for non-decompression diving.
Example:
21m 50min…………
This is understood as follows:
If the dive time does not exceed 50 minutes at a
depth of 21 meters, the diver can surface without
decompression.
12M – 200 min
30m – 25 min.
15m – 100 min.
33m – 20 min.
18m – 60 min.
36m – 15 min.
21m – 50 min.
39m – 10 min.
24m – 40 min.
42m – 10 min.
27m – 30 min.
45m – 5 min.
Return to Table of Contents
Return to Table of Contents
