The time required for charging varies according
to the model of the watch.The following times
are shown below to serve only as a reference.
[NOTE]
• The continuous operating time of this
watch becomes shorter the more often the
diving mode, dive alarms, EL light and other
functions of this watch are used.
• Allowing the watch to become wet other than
when diving causes activation of the water
sensor resulting in a shortened continuous
operating time.
Charging Time
Reference Position Check Mode
Correcting Reference Position of Each Hand
This mode is used to check that all of the watch hands, including
the function hand, are at the correct positions to ensure that the
watch functions properly.
A. Checking the Reference Position
(1) Switch the watch to the "Reference Position Check" mode.
• The second, minute and hour hands move to the reference
position (12:00:00).
• The function hand moves to the "0" (READY) position on the
depth scale.
(2) Correction is not required if each hand indicates the correct
position. Press button (D) to return to the previously used mode.
• If the hands are not at their reference positions, correct them to
the correct positions by referring to the correction procedure
described below.
[Reference Position of Each Hand and Digital
(1) Switch the watch to the "Reference Position Check" mode.
(2) Press button (C) for about 2 seconds or more.
• "00" of "DP-00 flashes on the digital display.
• The function hand moves when button (B) is pressed.
Press button (B) several times until the function hands indicates "0"
on the depth scale.
(3) Press button (C).
• The corrected location changes in the order shown below each time
button (C) is pressed.
• Press button (B) to align each hand at 12:00.
(4) Once each hand has been aligned at its reference position, press
button (D) to return the watch to the previously used mode.
Switching the Mode
• Watch mode switches in the order of the
Time/Date, Surface, Travel Time, Alarm 1,
2, & 3, Dive Alarm Setting, Diving Log
Recall & Reference Position Check modes
when button (D) is pressed.
• When the water sensor detects water,
the watch automatically switches to
"Diving Ready 1 Status" of the Diving
Mode.
[Button Operations]
• The mode cannot be changed by
pressing a button while the mode is
changing or while the hands are moving
when making a correction. Press the
desired button after waiting until the
hands have stopped at their
predetermined positions.
