Setting the Time and Date
Using the Travel Time Mode
1. Using the Time/Date Mode
This mode indicates the time with the hands and displays the date on the digital display. The function hand indicates the
charge level of the secondary battery.
A. Setting the Time and Date
• Analog time cannot be corrected independently. The analog time is corrected automatically when the digital time is
corrected.
(1) The watch enters the correction state when button (C) is pressed for about 2 seconds in the time/date mode.
• Digital display: Changes to "seconds" and flashes.
• Hour, minute and second hands: Move to 12:00 and stop.
• If the second hand does not stop at the 12:00 position, press button (B) to set it to 12:00. The second hand moves 1
second when button (B) is pressed. Continuously depressing button (B) causes the second hand to move continuously.
(2) The flashing location on the display changes in the order shown below each time button (C) is pressed.
(3) Correct the flashing location by pressing button (B) or button (A).
• The display moves forward by one each time button (B) is pressed.
• The display moves back by one each time button (A) is pressed.
• Depressing either button continuously causes the display to advance rapidly.
(4) The watch returns directly to the normal display when button (D) is pressed in the correction state.
This mode is used to display the time and date of a
selected city by selecting a city name from UTC and 42
cities registered in this watch.
Setting Travel Time
(1) A city name flashes when button (C) is pressed for
about 2 seconds in the travel time mode.
• The hour and minute hands move to 12:00 and stop.
(2) Switch the city name by pressing button (A) or
button (B).
• City names are recalled moving in the direction in
which the time difference increases when button (B) is
pressed. City names are recalled moving in the
direction in which the time difference decreases when
button (A) is pressed.
• The city name can be switched continuously by
depressing either button continuously.
• Refer to "Displayed Cities" for information on cities
displayed by this watch.
(3) The watch enters the daylight savings time
correction state when button (C) is pressed.
• The "S" mark (daylight savings time set) or "
g
"mark
(daylight savings time canceled) flash.
(4) Correct by pressing button (A) or button (B). • The "S" and "
g
" marks change back and forth each time a button is
pressed.
(5) The watch returns directly to the normal travel time display when button (D) is pressed while in the correction state.
