CITERM G1p, Manual

Page: 17 / 25

17
Burner pump cleaning
If there is no enough oil in burner tank,
You must do next:
- Unscrew pump cover screws
- Clean metal strainer (see picture)
- Be careful not to damage gasket
Cleaning oil line
- Unscrew vacuum port screw
- Blow in with compressed air gun
- You will hear bubbles in the storage tank
- Screw back vacuum port screw
- Unscrew bleed port
- Turn the burner on
- When oil arrive, close bleed port.
Maintenance
SUPPLY LINES
Read this section carefully before installing
any supply lines. Since a suction line leak is
nearly impossible to find,
take your time to
assure all connections are leak-free during
installation.
Always use liquid Teflon to seal all fittings
On the oil lines.
That is only way to prevent false air
coming into pump.
Always use clamps to tight oil pipes to fittings.