10
Lubrication
Check all fluids and lubricate the vehicle monthly. Lubricate more frequently during
periods of high use.
Brake Fluid:
901 DOT3
Rear Axle:
90GL-5 Hypoid - 1 Liter
Grease Lubrication Points:
Steering column, axle, wheel bearings, steering ball joint
Break-In Procedure
A new low speed vehicle should be driven with a minimum load for the first full charge.
This will ensure that all of the systems are functioning properly and will ensure that the
system does not get overloaded before the break in is completed. Typical break in periods
last about one month.
Before operating your low speed vehicle for the first time, check all of the batteries are
filled with fluids, that all joints are greased, and that the brake fluid is full.
The tire pressure should be 3.5kgf/cm². Avoid driving on roads that are in poor condition.
General Maintenance
Regularly grease and lubricate the rear power assembly, wheels, and steering column.
The brake system may need to be adjusted after periods of heavy use.
Check the electrical system, contacts, and wires for any obstructions, dirt or grease, and
clean with a cloth, brush, or air.
Loose contacts can become hot, so keep contacts free of dirt.
Check the rated current of fuses before replacing
Disconnect the positive lead on the battery when servicing, for safety. Only use distilled
water in the batteries.
Do not depress the accelerator pedal repeatedly, as this will burn out the accelerator.
Do not drive at high speeds down a hill or when turning.
All passengers should be seated and using their seat belts when the vehicle is in motion.
Please contact citEcarEV, LLC for an up to date list of service centers in your area. It is
suggested you have your vehicle serviced at least one time every year.
