background image

Content

Contents

1 General safety instructions

.............................................................. 3

2 Technical data and dimensions

....................................................... 4

Technical data ................................................................................ 4

Dimensions ..................................................................................... 5

3 Installation and connection

............................................................. 7

Ground ............................................................................................ 7

Anchoring ....................................................................................... 7

Water connection ............................................................................ 7

Water drain ..................................................................................... 8

Main power connection .................................................................... 8

Liquid soap connection ................................................................... 9

Connection of a central operating panel for coinmachines ............... 10

Steam connection ........................................................................... 11

4 Operating instructions

..................................................................... 12

Machine with start button ................................................................ 12

Machine with coin or token operation............................................... 21

5 Standard programs

.......................................................................... 27

6 Technical remarks

............................................................................ 28

Internal connection of the electrical heating .................................... 28

Internal connections of the motor .................................................... 28

Thermo-magnetic motor protection .................................................. 29

Error messages .............................................................................. 29

7 Maintenance of the machine

........................................................... 31

Code: 249/00170/00

22/12/00

Summary of Contents for CHHW50-WE176-234
































Reviews: