Cissell CHHW50-WE176-234, Instruction Manual

Page: 22 / 31

22
4
Display information
The left display will indicate the temperature of the wash bath - in °C or °F (on
machines where this function has been selected).
The central display shows the remaining time to the end of the wash cycle .
For programs which are being run for the first time, the machine will take a
theoretical time estimate. If this time indication does not correspond to the real
cycle time, the cycle time will be corrected from the second cycle onwards (
Self-
Teaching function of the machine ).
This function has to be specified during preprogramming.
The right display will continue to show the selected program number .
If a "Level-stop" was programmed (which halts the programmer during the filling
of the cylinder) and/or a "Heat-stop" (which stops the programmer during the
heating up of the wash bath, then the respective LED’s light up in the display.
Once the required water level and/or temperature have been reached, the LED
is turned off and the internal programmer advances again.
Wash cycle-LED’s
Each program segment has a corresponding LED. Each of these 6 LED’s light up
when the appropriate segment is executed. This way, the program sequence can be
accurately followed.
When a
LED blinks , the machine is taking up water.
When a LED blinks slowly , the machine is heating up the water.
Spin-LED’s
When the water is drained at the at the end of a program segment and the machine
spins if so desired, the
left spin-LED (intermediate spin) will light up together with
the cycle-LED.
- Functioning of the spin-LED’s during intermediate spin:
LED drain/distribution low spin coast
Interm. spin blinking rapidly continuously continuously
- Functioning of the spin-LED’s during gentle-intermediate spin:
LED drain/distribution low spin coast
Interm. spin blinking rapidly blinking slowly blinking slowly
During final spin, both the left spin-LED (intermediate spin) will light up together with
the right spin-LED.
- Functioning of the spin-LED’s during final spin:
LED drain/distribution low spin high spin coast tumble
Interm. spin blinking rapidly continuously slowly continuously off
Final spin continuously continuously slowly continuously rapidly
- Functioning of the spin-LED’s during gentle-final spin:
LED drain/distribution low spin high spin coast tumble
Interm. spin blinking rapidly slowly ---- slowly off
Final spin continuously continuously ---- continuously rapidly
Indications of program
sequence