Chapter 3
Advanced Configuration
7
RangePlus Wireless USB Network Adapter
5. The Adapter connects to the network.
Connecting to the Network via Wi-Fi Protected Setup
NOTE:
If the connection cannot be set up,
the message
Registration failed
appears. If
this happens, click
Connect
to try again
using the Wi-Fi Protected Setup button , or
click
Skip
to try again using the Adapter’s PIN
number, and then go to
Enter the Adapter’s
PIN Number
,
page 7
.
6. The
Connected to Your Network
screen appears. Click
Remember this network
if you want to save your
network’s settings. Click
Finish
to exit the Wireless
Manager.
Connected to Your Network
Congratulations! The Adapter is connected to
the network.
Enter the Adapter’s PIN Number
Enter the PIN Number
1. Access the web-based utility of the router. (Refer to the
router’s documentation for instructions.)
2. On the router’s
Wi-Fi Protected Setup
screen, enter
the Adapter’s PIN number in the appropriate
field.
Then perform the appropriate action to save the PIN
number; for example, click
Register
. (Refer to the
router’s documentation for instructions.)
3. The Adapter connects to the network and the
Connected to Your Network
screen appears. If you want
the Wireless Manager to save your network’s settings,
click
Remember this network
. Click
Finish
to exit the
Wireless Manager.
Connected to Your Network
Congratulations! The Adapter is connected to
the network.
