3-3
Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide
OL-17739-01
Chapter 3 Installing the Wide Area Virtualization Engine
Installing the WAVE Appliance on a Wall
Figure 3-1
WAVE-274 and WAVE-474 Appliance Mounting Sleeve
To mount your WAVE appliance using the mounting sleeve, follow these steps.
Step 1
Power down the appliance before beginning the installation.
Step 2
Orient the mounting sleeve as desired and attach it to the mounting surface using
the fasteners provided or other appropriate fasteners. See
Figure 3-2 on page 3-4
.
Caution
Mounting surfaces vary widely. We recommend that you use the
appropriate screws or other mounting solution for your type of surface.
Be sure your mounting solution is properly installed to support the
weight.
24
3
29
3
Summary of Contents for WAVE-274
Page 4: ......
