Cisco WAP125, Administrator'S Manual

Page: 25 / 114

A host name can consist of one or more labels, which are sets of up to 63 alphanumeric characters. If a host name
includes multiple labels, each is separated by a period (.). The entire series of labels and periods can be up to 253
characters long.
•
Enable
—
Check Enable to enable the remote log server. Next, define the log severity and UDP port.
•
Log Severity
—
Check the severities that an event must have for it to be sent to remote log server.
• UDP Port — Enter the logical port number for the syslog process on the remote host. The range is from 1 to 65535.
The default port is 514.
Using the default port is recommended. If you reconfigure the log port, make sure that the port number that you
assign to syslog is available for use.
Step 3 Click Save . The changes are saved to the Startup Configuration.
If you enable a remote log server, clicking Save activates the remote logging. The WAP device sends its kernel
messages in real-time for display to the remote log server monitor, a specified kernel log file, or other storage,
depending on your configuration.
If you disabled a remote log server, click Save to disable remote logging.
Note
View System Log
The View System Log page displays the list of system events occurring on the device. The log is cleared upon
a reboot and can be cleared by an administrator. Up to 1000 events can be shown. Older entries are removed
from the list as needed to make room for new events.
To view the system logs, select Notification > View System Log .
The following information is displayed:
• Time Stamp — The system time when the event occurred.
•
Severity
— The severity level of the event.
•
Service
—
The service associated with the event.
•
Description
—
A description of the event.
You can filter or rearrange the settings on View System Log.
Click
Refresh
to refresh the screen and show the most current information.
Click Clear All to clear all entries from the log.
Click
Download
to download all entries from the log.
Email Alert/ Mail Server/ Message Configuration
The email alert feature supports mail server configuration, message severity configuration, and up to three
email addresses to send urgent and non-urgent email alerts. Use the Email Alert to send messages to the
configured email addresses when particular system events occur.
Cisco WAP125 Wireless-AC/N Dual Band Desktop Access Point with PoE
19
System Configuration
View System Log