Configuration | Policy Management | Traffic Management | Assign Rules to Filter | Change SA on Rule
13-37
VPN 3000 Concentrator Series User Guide
Add SA to Rule on Filter:
The Manager shows the name of filter to which you are adding a rule that has an
Apply IPSec
action
configured. You cannot change this name here. See
Configuration | Policy Management | Traffic Management
| Filters | Modify
.
IPSec SAs
The
IPSec SAs
list shows the configured SAs that are available; i.e., all the SAs in the active
configuration.
Apply
To add an SA to the rule, select the SA from the list and click
Apply
. The Manager returns to the
Configuration | Policy Management | Traffic Management | Assign Rules to Filter
screen for the filter you are
configuring, modifies the active configuration, and updates the
Current Rules in Filter
list to show the rule
with its SA.
Reminder:
To save the active configuration and make it the boot configuration, click the
Save Needed
icon at the
top of the Manager window.
Configuration | Policy Management | Traffic Management |
Assign Rules to Filter | Change SA on Rule
This screen lets you change the configured Security Association that is applied to a rule that has an
Apply
IPSec
action configured. You can assign only one SA to a rule.
On this screen, you change
which
SA is applied. You configure SAs themselves on the
Configuration |
Policy Management | Traffic Management | Security Associations
screens.
Note:
The change takes effect as soon as you click
Apply
. If this filter is being used by an interface or group,
the change may affect tunnel traffic.
