Configuration | User Management | Users
12-33
VPN 3000 Concentrator Series User Guide
Apply / Cancel
When you finish changing these parameters, click
Apply
to include your settings in the active
configuration. The Manager returns to the
Configuration | User Management | Groups
screen and refreshes
the
Current Groups
list. However, if you change group type to
Internal
, the Manager displays the
Configuration | User Management | Groups | Modify (Internal)
screen so you can configure all the parameters.
Reminder:
To save the active configuration and make it the boot configuration, click the
Save Needed
icon at the
top of the Manager window.
To discard your changes, click
Cancel
. The Manager returns to the
Configuration | User Management |
Groups
screen, and the
Current Groups
list is unchanged.
Configuration | User Management | Users
This section of the Manager lets you configure access, usage, and authentication parameters for users.
Users inherit parameters from the specific group to which they belong.
Configuring users in this section means configuring them in the VPN Concentrator internal
authentication server. If you have not configured the internal authentication server, this screen displays
a notice that includes a link to the
Configuration | System | Servers | Authentication
screen. The system also
automatically configures the internal server when you add the first user.
See the discussion of groups and users under
User Management
at the beginning of this chapter.
Remember:
•
You can configure a maximum of 100 groups and users (combined) in the VPN Concentrator internal
server.
•
A user can be a member of only one group.
•
Users who are not members of a specific group are, by default, members of the base group. Therefore,
to ensure maximum security and control, you should assign all users to appropriate specific groups,
and you should configure base-group parameters carefully.
Figure 12-11: Configuration | User Management | Users screen
